banner



How To Set Up Heimvision Smart Wifi Camera

HeimVision CA01/CA03 1080P Security Camera User Manual

CA01

Dear customer,

Thanks for purchasing our production. Please read the following instructions advisedly before beginning use and keep this user manual for hereafter reference. Pay particular attending to the safety instructions. If yous have any questions or comments about the device, please contact the customer line.

Mail Icon

www.alza.co.great britain/kontakt

Phone Icon

+44 (0)203 514 4411

Importer Alza.cz a.south., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

PACKING List

PACKING LIST

Product OVERVIEW

PRODUCT OVERVIEW

Notes:

  • CA03 has a microphone while CA01 has not.
  • The resolution of CA03 is 3M pixels while CA01 is 2M pixels.

Add together A NEW IP Camera TO THE NVR Organization

When you need to add a new IP Camera, please follow the steps below.

Step i:
Plug the power adapter into the new camera and socket;

Pace two:
Plug the LAN cable into the NVR system and the camera;

Step 2

Step three:
Right click on the main interface of NVR arrangement to show the Menu bar, then select Video Manage.

Stride 4:
Click Refresh to show the new IP photographic camera, select it, so click the Match Code to add together the new photographic camera automatically. Then you can unplug the LAN cable.

Step 4

Tip:
Later calculation the new photographic camera, please right click to evidence the Carte du jour bar, then select Divide Screen to alter the number of the channels showing in the same screen.

EXTEND THE WIFI RANGE

The Wifi indicate will be weaker when going through the wall, stairs and other obstacles. However, there are some solutions that may help to extend the Wifi range.

Adjust the Antennas to the Appropriate Angle

Co-ordinate to the point manual character of antenna, it'due south better to adjust the antennas of the cameras to be paralleled with the antennas of the NVR system when they are in the flat airplane or adjust the antennas of the cameras to be vertical to the antennas of the NVR arrangement when they are in the vertical plane, to receive better betoken.

Adjust the Antennas to the Appropriate Angle

Tip:

Place the NVR on the desk and be far away from the devices that are piece of cake to interfere the connectedness, such as microwave oven and Television receiver. Make sure the obstacles between the NVR and the cameras are as few every bit possible.

Get an extra Antenna Extension Cable with Stand

Take off the antenna of the IP camera, then install the Antenna Extension String into the IP Camera and put it to the place where the Wifi signal is strong.

Get an extra Antenna Extension Cable with Stand

Get an actress Repeater Device

To extend the Wifi range, yous can as well install a Repeater device. Please refer to the user manual of the Repeater device you bought for using it.

Set Cascading Connection

Notes:

  • When the IPCAM2 is installed out of the Wifi Range, but the IPCAM1 with strong Wifi signal (check it from the live picture) or with smooth streaming is between the NVR and IPCAM2, then you lot can set up up the IPCAM1 as a virtual repeater following the steps.

Set up Cascading Connection

  • This virtual Repeater part cannot strengthen the Wifi signal, but merely help to extend the Wifi altitude by the IP Camera.

Pace one:
Right click to evidence the Carte du jour bar, and then click Video Manage > Repeater to enter the Repeater setting.

Set up Cascading Connection Step 1

Stride 2:
Click + subsequently CH1/IPCAM1, then select ii to set IPCAM1 as a repeater. This means CH2/IPCAM2 is continued to the NVR through CH1/IPCAM1.

Set up Cascading Connection Step 2

Pace 3:
Click Utilise to stop the cascading connectedness. To bank check if information technology'south set successfully, please click Refresh. To delete the Repeater, left click on the selected channel, and then click Apply and OK.

Add together A CAMERA THROUGH LAN Cablevision

If the wifi signal is still also weak, you could switch to connect the IP camera with the NVR organization through LAN cable.

Stride i:
Connect the NVR arrangement and the IP camera to the same router through LAN cable.

Add a Camera Step 1

Step 2:
Right click on the master interface of NVR organization to show Card bar, then select Video Manage.

Footstep three:
Select the IP camera of which you would similar to switch the connection method, so delete it.

Add a Camera Step 3

Step 4:
Click Refresh to testify the IP photographic camera, select information technology, the click Auto Add to add the camera automatically. The added camera will be shown in the Added device list.

Add a Camera Step 4

SPECIFICATIONS

Operation frequency 2412-2472MHz
Max. RF output power <12dBm

Warranty Weather condition

A new product purchased in the Alza.cz sales network is guaranteed for two years. If y'all need repair or other services during the warranty period, contact the product seller direct, you must provide the original proof of purchase with the engagement of purchase.

The post-obit are considered to be a disharmonize with the warranty conditions, for which the claimed merits may not exist recognized:

  • Using the product for whatsoever purpose other than that for which the product is intended or failing to follow the instructions for maintenance, performance and service of the product.
  • Damage to the production past a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the heir-apparent (e.k. during transport, cleaning past inappropriate ways, etc.).
  • Natural wear and crumbling of consumables or components during use (such as batteries, etc.).
  • Exposure to agin external influences, such equally sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the blueprint or adaptation to modify or extend the functions of the production compared to the purchased design or use of non-original components.

European union Declaration of Conformity

Identification data of the manufacturer's / importer's authorized representative:

Importer: Alza.cz a.s.

Registered role: Jankovcova 1522/53, Holešovice, 170 00 Prague vii

IČO: 27082440

Subject area of the declaration:

Championship: Camera for HeimVision NVR System

Model / Blazon: CA01/CA03

The to a higher place product has been tested in accord with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

Directive No. 2014/53/European union

Directive No. 2011/65/EU as amended 2015/863/Eu

Prague, 27.1 2021

CE Mark

WEEE

This product must not be disposed of as normal household waste material in accordance with the Eu Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / Eu). Instead, information technology shall exist returned to the place of purchase or handed over to a public collection bespeak for the recyclable waste. By ensuring this product is disposed of correctly, you will help foreclose potential negative consequences for the environs and human being health, which could otherwise be caused by inappropriate waste handling of this production. Contact your local authority or the nearest collection indicate for farther details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

Ezoic

Disposal Mark

Documents / Resource

References

Source: https://manuals.plus/heimvision/ca01ca03-1080p-security-camera-manual

Posted by: daleytherning.blogspot.com

0 Response to "How To Set Up Heimvision Smart Wifi Camera"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel